Save 20% and get a FREE gift!

Code: SUMMER20

Sunday Seed + Feed image
time

Time Required: 10 minutes

difficulty

Difficulty: Moderate

When to apply Seed + Feed

Sun & Shade, Northwest, Northeast and Heat Tolerant Seed + Feed: When outside temps are about 60–75° F.


South Seed + Feed: When outside temps are about 70–90° F.

How to apply Seed + Feed

1

Mow

Mow a little lower than normal. Remove clippings to help seeds reach the soil.

Mow a little lower
2

Prep

Prep any thinning or bare areas by lightly raking or scratching up the soil surface.

Prep bare areas with a rake
3

Set

Set your spreader to the lowest setting to start. You can slowly increase the flow to a level that provides proper coverage as you go.

If you’re using a Sunday handheld spreader, set your spreader on the #2 setting. Otherwise, use our spreader settings chart for spreader-specific recommendations.

Set spreader setting to low to start
4

Fill

Fill spreader to the top.

Fill spreader
5

Spread

Apply in straight lines evenly across your lawn. Refill spreader as needed.

Push spreaders: Space wheel tracks about 3–4 feet apart to ensure full coverage.

Spread evenly over lawn
6

Water

Water in gently and evenly. Continue watering 1–2 times daily for 3 weeks until grass is established (about 2”). Once new grass is established, reduce watering to your normal schedule.

Watering after applying Seed + Feed
Sunday tip brain icon

Sunday Tip:

Sweep up any fertilizer that has fallen onto non-growing areas such as sidewalks, driveways, or drains. You can reuse it next time!

Seed + Feed quick tips

  • Wait at least 6 weeks between applications of Seed + Feed.
  • Wait at least 2 weeks between applying Seed + Feed and other Sunday fertilizer products.
  • Don't apply to a wet lawn or during heat stress or drought.
  • Don’t apply near water bodies, storm drains, or drainage ditches.
  • Don’t use pre-emergence weed control on your lawn prior to applying Seed + Feed - It can negatively impact seed germination.
  • Apply up to 4 applications per year.
Sun & Shade Seed + Feed

Sun & Shade Seed + Feed

  • 10 lb. bag
  • Covers up to 1,500 sq. ft.
  • See results in 8-21 days, depending on moisture and temps
  • Grass types: Tall fescue, fine fescue, Kentucky bluegrass, perennial ryegrass
  • Drought- and disease-resistant cultivars

Seed + Feed FAQs

What's in Seed + Feed

  • Drought-tolerant and disease-resistant grass varieties to help thicken the lawn
  • Slow-release nitrogen for strong growth and sustained greening
  • Iron for immediate, deep greening
  • Limestone, gypsum, and dried poultry waste to improve soil structure

How much Seed + Feed should I use?

Depending on the size of the bag (10lb or 20lb), coverage will vary:

  • 10lb bag covers 1,500 sq. ft. - about the size of ½ a tennis court
  • 20lb bag covers 3,000 sq. ft. - about the size of a tennis court

You can find specific application rates on the back of the bag.

When should I use Seed + Feed?

The optimal time to apply Seed + Feed products will be during optimal temperatures for cool- or warm-season grass seed germination.

  • For northern and transitional zones: When temperatures range between 60–75º F usually during spring and fall.
  • For southern zones: When temperatures range between 70–90º F, usually late spring to mid summer.
Sunday tip brain icon

Sunday Tip:

Seed + Feed is appropriate for all of the most commonly grown residential turfgrasses. However, we don’t recommend applying to centipedegrass more than 2x per year, and it’s not formulated for golf course favorites such as colonial bentgrass or creeping bentgrass.

How do I use Seed + Feed with other Sunday products? Why should I apply in this order?

Ideally, you’ll want to treat as many weeds as possible before applying Seed + Feed. Why? Otherwise, when the granular fertilizer and seed are watered in, you’ll be feeding and watering the weeds as well. The lawn doesn’t need to be perfect to fertilize, but the fewer weeds the better.

We do not recommend utilizing both Seed + Feed and other fertilizers at the same time. Applying two types of fertilizer together can cause overfertilization or damage to actively growing grass. If you are switching between Seed + Feed and other fertilizers, wait at least 6 weeks between applications.

What if I apply out of order?

If you applied Seed + Feed first, water it in and wait 24 hours before applying weed control. Regardless of the order applied, we recommend allowing at least 24 hours between watering in Seed + Feed products before doing anything else to the lawn—this ensures even application.

How should I store Seed + Feed

Store this product sitting upright with the bag sealed tightly. Avoid storing in areas where kids, pets, or pests could potentially access the product. Avoid storing in areas with excessive moisture.

Share via FacebookShare via TwitterShare via Pinterest
Author image

Jenni Hanley

Jenni earned her Bachelor of Journalism with a minor in Sociology from the University of Missouri. Her background includes reporting, editing, and content writing, and she is passionate about gardening.

Recommended Reading